Yes, it can be applied on rusted metal after treatment with CP10 rust converter. All loose dirt and rust must be removed prior to application and surface preparation must be done up to at least ISO SA 2.5 standard

No, blasting is not mandatory for new surfaces, but surfaces must be free of dust/dirt and cleaned using DEVCON Cleaner Blend Aqua100; for aged steels, surface preparation must be done up to at least ISO SA 2.5 standard and blasting can be avoided.

The coating is suitable for application on mild steel, concrete and any structural assemblies.

DEVCON Protective Coatings resist a wide range of acids, alkalis, and solvents, including: 98 % Sulphuric acid, 32 % Hydrochloric acid, 20 % Nitric acid, 10 % Acetic acid, 20 % Phosphoric acid, 20 – 50 % Sodium hydroxide, and Sodium hypochlorite, MEK, Hexane, Toluene, Ethyl acetate. The temperature resistance of the coating systems is as follows:

• PrimerPro 1030 AR: Up to 150 °C (dry) / 65 °C (wet)
• EpoxyCoat 5045 AR: Up to 65 °C (max.)

Yes, but surfaces must be dry and free from standing water at the time of application.

For best performance, it is recommended to use PrimerPro 1030 AR as the primer coat and EpoxyCoat 5045 AR as the topcoat system.
The suggested dry film thicknesses (DFT) are: PrimerPro 1030 AR: 150-200 microns & EpoxyCoat 5045 AR: 250-300 microns